AMS Malleable 650/600M

Home \| About Us \| Investors \| Careers \| Contact Us

Home | Medical Professionals | AMS Medical Solutions

Overview

AMS 650TM and 600M TM
Malleable Penile Prostheses
The AMS 650^TM and 600M^TM malleable penile prostheses offer easy-to-use, low-cost options for many patients—especially those with limited dexterity. These implants are always rigid, but their flexibility allows the patient to position them in an erect or concealed position. Designed to make the penis rigid enough for sexual intercourse and to not interfere with pleasurable sensation, orgasm or ejaculation.

Advantages for Physicians

Single-component design requires less time in the operating room
Stainless steel wire core for excellent rigidity
Tapered silicone elastomer body for natural shape
Separate rear tip extenders for specific sizing
Opportunity for outpatient implantation

Advantages for Patients

Maintains stiff erection without buckling
Shaped to provide excellent girth
Excellent for men with limited dexterity

Device Mechanics
The AMS 650 and AMS 600M penile prostheses consist of two silicone elastomer rods made from:

A stainless steel wire core surrounded by braided polyester suture
A tapered silicone elastomer body
An external removable silicone jacket

The 600M rods measure a consistent girth all along the rod, up the beginning of the tip. The 650 rods are tapered at both the proximal and distal ends with the widest measurement occurring at mid-shaft, to provide excellent girth.

Comparison of Models 650 and 600M



Feature	AMS 650	AMS 600M



Length	12 cm 16 cm 20 cm	12 cm 14 cm 16 cm 18 cm

Diameter	13 mm with jacket 11 mm without jacket Stackable rear tip extenders: 0.5 cm, 1 cm, 2 cm, 3 cm	11.5 mm with jacket 9.5 mm without jacket Stackable rear tip extenders: 1 cm each

Angle of Concealment*	134 wire bundle; 45 degree angle of concealment for better concealability	50 wire bundle; 82 degree angle of concealment for less concealability

*Non-inflatable prostheses spring back slightly after they are bent down. The angle of concealment is the degree of automatic return after bending the prosthesis 90 degrees. The smaller the angle, the greater the concealability.